Lithium Battery Fire Suppression System Exporter Delhi NCR

Engineered Lithium-Ion Battery Fire Protection Solutions for International Projects

Lithium-ion batteries are transforming the global energy, transportation, telecommunications and industrial sectors. They are widely used in Battery Energy Storage Systems, electric vehicles, renewable-energy projects, data centres, UPS installations, telecom battery banks, warehouses and automated industrial equipment.

Although lithium-ion batteries provide high energy density, compact construction and reliable performance, they also introduce specialised fire risks. Electrical faults, overcharging, manufacturing defects, excessive temperature, mechanical damage or cooling-system failure may cause a battery cell to enter thermal runaway.

During thermal runaway, the affected cell can generate intense heat, smoke and flammable gases. The heat may spread to neighbouring cells, modules and battery racks. Damaged batteries may also retain heat and present a risk of re-ignition even after visible flames have been controlled.

United Fire Equipments Pvt. Ltd., under the LIFEGUARD brand, is a reliable lithium battery fire suppression system exporter in Delhi NCR, providing customised detection, alarm, control, isolation and suppression solutions for lithium-ion battery applications.

From our Delhi NCR base, we support international project owners, consultants, EPC contractors, battery manufacturers, renewable-energy developers and system integrators with project-specific fire protection systems, technical documentation and export coordination.

Trusted Lithium Battery Fire Suppression System Exporter in Delhi NCR

Selecting an experienced lithium battery fire suppression system exporter Delhi NCR is important for protecting personnel, valuable equipment and critical operations.

A standard portable extinguisher may not provide complete protection for a large lithium-ion battery installation. An engineered battery fire protection solution may require a coordinated combination of:

• Very early smoke detection
• Battery off-gas detection
• Heat and temperature monitoring
• Linear heat-sensing cable
• Automatic fire alarm controls
• Battery charging shutdown
• Electrical isolation
• Ventilation control
• Automatic suppression discharge
• Cooling and propagation control
• Remote alarm communication
• Manual emergency controls
• Post-discharge temperature monitoring

LIFEGUARD evaluates the actual battery hazard before recommending a system. The final configuration depends on battery chemistry, energy capacity, rack arrangement, enclosure volume, ventilation, operating environment and project approval requirements.

No single extinguishing medium should be treated as universally suitable for every lithium-ion battery application.

What Is a Lithium Battery Fire Suppression System?

A lithium battery fire suppression system is an engineered arrangement designed to detect and respond to an abnormal condition within lithium-ion battery cells, modules, racks, cabinets, rooms or BESS containers.

Depending on the application, the system may be designed to:

1. Detect smoke, heat, flame or battery off-gases.
2. Generate an early warning alarm.
3. Activate audible and visual warning devices.
4. Transmit signals to the main fire alarm system.
5. Stop battery charging and discharging.
6. Isolate the affected battery rack or equipment.
7. Shut down selected electrical systems.
8. Control ventilation and air-conditioning.
9. Release the selected suppression medium.
10. Control visible flames and reduce heat exposure.
11. Limit propagation to neighbouring cells and modules.
12. Continue monitoring for possible re-ignition.

The final sequence of operation is developed according to the project’s approved cause-and-effect logic.

Understanding Lithium-Ion Battery Fire Hazards

Lithium-ion batteries store substantial electrical energy within a compact structure. When a cell operates outside its safe temperature, voltage or current range, internal chemical reactions may accelerate.

Common causes of battery incidents include:

• Internal short circuits
• External short circuits
• Overcharging
• Excessive discharge
• Cell manufacturing defects
• Mechanical impact
• Puncture or crushing
• High ambient temperature
• Cooling-system failure
• Loose electrical connections
• Incorrect charger selection
• Battery Management System malfunction
• Moisture or water ingress
• Transportation damage
• Ageing or defective battery cells

During thermal runaway, a battery cell may release smoke, heat and flammable decomposition gases. Heat transfer to neighbouring cells can create a chain reaction known as thermal runaway propagation.

A complete lithium battery safety strategy should therefore include:

• Quality battery cells and modules
• Reliable Battery Management System
• Correct electrical protection
• Suitable ventilation
• Temperature monitoring
• Very early fire detection
• Automatic shutdown and isolation
• Suitable suppression and cooling
• Emergency-response procedures
• Continued post-incident observation

The fire suppression system is an important part of this strategy, but it does not replace safe battery design, preventive maintenance or proper electrical protection.

Lithium Battery Fire Suppression Export Applications

1. Battery Energy Storage Systems

Battery Energy Storage Systems, commonly known as BESS, are used for renewable-energy integration, grid balancing, peak-load management and emergency backup power.

LIFEGUARD supplies fire protection solutions for:

• Containerised BESS installations
• Indoor battery rooms
• Outdoor battery enclosures
• Utility-scale energy-storage projects
• Solar-plus-storage systems
• Wind-energy storage facilities
• Commercial energy-storage projects
• Industrial backup-power systems
• Microgrids
• Electrical substations
• Grid-support battery facilities

A BESS fire protection package may include:

• Aspirating smoke detection
• Battery off-gas detection
• Heat detection
• Linear heat-sensing cable
• Flame detection
• Automatic fire alarm panel
• Releasing control panel
• Suppression-agent cylinders
• Distribution piping and nozzles
• Battery Management System interface
• Ventilation shutdown
• Emergency exhaust integration
• Manual release and abort controls
• Audible and visual warning devices
• Remote alarm outputs

2. BESS Container Fire Suppression Systems

Containerised Battery Energy Storage Systems contain battery racks, power-conversion equipment, electrical panels, cooling units and control systems inside a compact enclosure.

A complete BESS container protection system may include:

• Very early smoke detection
• Gas or battery off-gas monitoring
• Heat and temperature detection
• Linear heat-sensing cable
• Automatic releasing controls
• Suppression-agent storage cylinders
• Distribution piping
• Discharge nozzles
• Pressure-monitoring devices
• Battery shutdown contacts
• Ventilation interlocks
• Remote alarm transmission
• Manual activation controls
• Hooters and flashing strobes

The design should consider:

• Battery-rack configuration
• Internal airflow
• Cooling-system operation
• Ventilation openings
• Cable penetrations
• Enclosure leakage
• Internal partitions
• Equipment obstructions
• Maintenance access
• Separation between containers

3. Renewable-Energy Storage Projects

Lithium-ion batteries are widely used with solar and wind energy systems to store power and improve energy availability.

LIFEGUARD fire protection solutions can be supplied for:

• Solar-plus-storage projects
• Wind-energy storage installations
• Commercial renewable-energy systems
• Industrial energy-management facilities
• Microgrids
• Remote power installations
• Utility energy-storage plants
• Community energy-storage systems

The suppression system may be integrated with:

• Battery Management Systems
• Power-conversion systems
• Inverters
• Energy-management platforms
• Site fire alarm systems
• Remote monitoring systems

4. Electric Vehicle Battery Manufacturing

Lithium batteries present different fire risks during production, assembly, charging, testing and storage.

LIFEGUARD can develop fire protection systems for:

• Battery cell manufacturing
• Battery module assembly
• Battery-pack production
• Charging stations
• End-of-line testing
• Battery test chambers
• Research laboratories
• Prototype testing facilities
• Battery repair areas
• Rejected-battery storage
• Damaged-battery quarantine zones
• Quality-control facilities

Protection can be designed for individual machines, testing enclosures, production lines, battery racks or complete rooms.

5. Electric Vehicle Charging Stations

EV charging facilities may contain high electrical loads, charging equipment and multiple battery-powered vehicles.

Fire protection solutions may be designed for:

• Indoor EV charging areas
• Underground parking facilities
• Commercial parking structures
• Residential buildings
• Shopping centres
• Hotels
• Corporate offices
• Electric bus depots
• Fleet charging yards
• Electric truck charging stations
• Battery-swapping facilities
• EV maintenance workshops

The fire protection concept may include:

• Smoke and heat detection
• Flame detection
• Electrical isolation
• Emergency shutdown
• Automatic alarm generation
• Local suppression
• Water-based protection
• Ventilation control
• Remote alarm communication

6. Data Centres and UPS Battery Rooms

Lithium-ion batteries are increasingly used for uninterrupted power supply and backup-energy applications in data centres.

LIFEGUARD supplies protection systems for:

• UPS battery rooms
• Server rooms
• Data halls
• Network operation centres
• Electrical rooms
• Telecom rooms
• Modular data centres
• Edge data centres
• Control and monitoring rooms

The system may be integrated with:

• Main fire alarm systems
• Building Management Systems
• UPS controls
• Electrical shutdown systems
• Air-conditioning equipment
• Access-control systems
• Emergency ventilation
• Remote monitoring platforms

Very early detection may provide additional time for investigation and controlled intervention before a serious incident develops.

7. Telecom Battery Banks

Telecommunication facilities depend on battery systems for reliable backup power and uninterrupted operation.

Fire suppression systems may be supplied for:

• Telecom battery rooms
• Mobile switching centres
• Remote telecom shelters
• Network equipment rooms
• Battery cabinets
• Communication towers
• Data transmission facilities
• Control rooms

Compact automatic suppression systems may be installed inside individual battery cabinets, telecom shelters or enclosed equipment zones.

8. Lithium Battery Warehouses

Lithium battery warehouses require a risk-based fire protection strategy because fire behaviour depends on battery chemistry, packaging, state of charge, storage height and rack configuration.

LIFEGUARD systems may be used for:

• New lithium-ion cells
• Battery modules
• Finished battery packs
• Electric vehicle batteries
• Consumer-electronics batteries
• Power-tool batteries
• Telecom batteries
• Industrial batteries
• Returned battery products
• Defective batteries
• Damaged-battery quarantine areas

Important warehouse considerations include:

• Total battery quantity
• Battery chemistry
• State of charge
• Storage height
• Rack arrangement
• Aisle spacing
• Packaging material
• Fire compartmentation
• Water availability
• Smoke ventilation
• Emergency access
• Damaged-battery segregation

9. Battery Recycling Facilities

Used, defective or damaged batteries may have an unknown internal condition. They can create fire hazards during collection, sorting, storage, dismantling and recycling.

Protection may be required for:

• Battery collection centres
• Battery recycling plants
• Waste battery storage
• Battery dismantling areas
• Material recovery facilities
• Electronic waste processing plants
• Returned-product warehouses
• Damaged-battery quarantine rooms

The suppression arrangement should be coordinated with the facility’s storage methods, waste-handling procedures, ventilation and emergency-response plan.

10. Marine and Industrial Applications

Lithium battery systems are also used in vessels, port equipment, industrial automation and mobile machinery.

LIFEGUARD fire protection solutions may be supplied for:

• Marine battery rooms
• Electric and hybrid vessels
• Port handling equipment
• Offshore control systems
• Automated guided vehicles
• Robotics facilities
• Forklift charging areas
• Machine enclosures
• Industrial backup-power systems
• Material-handling equipment

The system components should be selected according to environmental conditions, corrosion exposure, vibration, humidity and project specifications.

Main Components of a Lithium Battery Fire Suppression System

Very Early Smoke Detection

Aspirating smoke-detection systems continuously sample air from the protected area through a network of pipes.

These systems may be suitable for:

• BESS containers
• Battery rooms
• Data centres
• UPS rooms
• Telecom facilities
• High-value industrial installations

Detector sensitivity and sampling-point arrangement should be selected according to airflow, enclosure configuration and the required warning level.

Battery Off-Gas Detection

Lithium-ion cells may release gases during abnormal heating before visible flames appear.

Battery off-gas detection can support:

• Early warning
• Battery shutdown
• Rack isolation
• Ventilation control
• Remote alarm transmission
• Maintenance intervention

Sensor selection should consider battery chemistry, expected gases, ventilation and the battery manufacturer’s technical information.

Heat and Temperature Detection

Heat-detection options may include:

• Fixed-temperature detectors
• Rate-of-rise heat detectors
• Linear heat-sensing cable
• Battery temperature sensors
• Thermal-camera integration

Linear heat-sensing cable may be installed near battery racks, modules, cable routes or other identified risk areas.

Flame Detection

Flame detectors may be used where rapid flame recognition is required.

Possible detector technologies include:

• Ultraviolet detection
• Infrared detection
• Combined UV/IR detection
• Multi-spectrum infrared detection

Detector selection should consider the expected fire signature, viewing angle, obstructions and possible false-alarm sources.

Fire Alarm and Releasing Control Panel

The fire alarm or releasing panel receives signals from detection devices and initiates the programmed emergency sequence.

The panel may be configured to:

• Generate an early warning
• Display the affected zone
• Activate sounders and strobes
• Transmit alarms to a control room
• Stop battery charging
• Isolate the affected rack
• Shut down selected electrical equipment
• Stop air-conditioning
• Close fire dampers
• Control ventilation fans
• Activate emergency exhaust
• Release the suppression medium
• Communicate with the Battery Management System
• Send signals to the Building Management System
• Provide remote alarm contacts

Cross-zone logic may be used where two independent alarm signals are required before automatic suppression discharge.

Automatic Fire Suppression System

The extinguishing medium should be selected according to the battery hazard and project requirements.

Potential options may include:

• Water-mist systems
• Water-based cooling systems
• Local-application suppression
• Specialised liquid suppression media
• Hydrated mineral or mica-based suppression media
• Clean-agent systems for associated electrical equipment
• Inert-gas systems for suitable enclosed hazards
• Condensed aerosol systems where technically appropriate
• Hybrid fire protection arrangements

The final selection should consider:

• Battery chemistry
• Cooling requirements
• Cell and module construction
• Protected volume
• Battery-rack arrangement
• Electrical conductivity
• Occupancy
• Ventilation
• Ambient conditions
• Discharge duration
• Fire propagation risk
• Re-ignition risk
• Available test data
• Project specifications
• Authority and insurer requirements

A clean-agent or oxygen-reduction system may control flames in suitable enclosed applications, but the need for battery cooling and continued monitoring should also be evaluated.

Suppression Cylinders and Storage Tanks

Depending on the selected technology, the suppression medium may be stored in:

• Pressurised cylinders
• Modular suppression units
• Cabinet-mounted containers
• Skid-mounted cylinder banks
• Water-storage tanks
• Pump-operated systems

The required capacity is determined according to the protected hazard, application rate, agent quantity, pipe network and discharge duration.

Distribution Piping and Nozzles

The distribution network carries the extinguishing medium from the storage container to the protected area.

The design may consider:

• Pipe material
• Internal pipe diameter
• Total pipe length
• Bends and fittings
• Pressure loss
• Nozzle flow rate
• Nozzle coverage
• Battery-rack dimensions
• Internal obstructions
• Number of suppression zones
• Minimum operating pressure
• Required discharge duration
• Maintenance accessibility

Nozzles should be positioned so that racks, cable trays, electrical panels and structural members do not obstruct the discharge pattern.

Manual Release and Abort Controls

The system may include:

• Manual release switch
• Abort switch
• Emergency stop button
• Electrical isolation control
• System-disable switch
• Alarm acknowledgement control
• Local status indicators

Manual controls should be clearly labelled and installed at accessible locations according to the approved design.

Audible and Visual Warning Devices

Warning devices may include:

• Electronic hooters
• Sounders
• Sirens
• Flashing strobes
• Hooter-cum-flasher units
• Pre-discharge warning signs
• System-discharge indicators

These devices alert personnel before and during suppression-system operation.

How the Lithium Battery Fire Suppression System Works

A typical system may follow the sequence below.

Stage 1: Abnormal Condition Detected

A smoke, heat, gas, flame or temperature sensor detects an abnormal condition within the battery installation.

Stage 2: Early Warning Generated

The control panel generates an alarm and sends the condition to responsible personnel or a remote monitoring platform.

Stage 3: Fire Condition Confirmed

A second detector, cross-zone signal or programmed verification logic confirms the emergency.

Stage 4: Emergency Interlocks Activated

The system may:

• Stop battery charging
• Isolate the affected battery rack
• Shut down selected electrical equipment
• Stop air-conditioning
• Close dampers
• Control ventilation
• Activate emergency exhaust
• Transmit signals to the Battery Management System

Stage 5: Pre-Discharge Warning

Audible and visual devices warn personnel before automatic suppression discharge, where required.

Stage 6: Suppression Medium Released

The selected extinguishing medium is discharged through the engineered pipe and nozzle network.

Stage 7: Fire Control and Cooling

The system works to control visible flames, reduce heat and limit fire propagation.

Stage 8: Continued Monitoring

The affected battery system remains isolated and monitored because damaged cells may retain heat and potentially re-ignite.

Export Engineering Support from Delhi NCR

LIFEGUARD follows a project-specific engineering approach for international lithium battery fire protection requirements.

Technical Evaluation

Our engineering team may review:

• Battery chemistry
• Battery manufacturer
• Cell and module construction
• Total energy capacity
• Number of battery racks
• State of charge
• Charging and discharging process
• Room or container dimensions
• Battery layout
• Ventilation arrangement
• Maximum and minimum ambient temperatures
• Environmental exposure
• Existing fire alarm system
• Existing suppression arrangement
• Available water supply
• Electrical shutdown requirements
• Consultant specifications
• Tender documents
• Destination-country requirements

System Selection

The detection, alarm and suppression technologies are selected according to the actual battery hazard and operating environment.

Engineering Calculations

Depending on the selected system, engineering may include:

• Protected-volume calculation
• Suppression-agent quantity calculation
• Hydraulic flow calculation
• Pipe sizing
• Pressure-loss calculation
• Nozzle selection
• Nozzle coverage assessment
• Cylinder or tank sizing
• Discharge-time calculation
• Alarm and interlock logic

Technical Documentation

Project documentation may include:

• General arrangement drawings
• Fire detection layouts
• Suppression-system layouts
• Piping drawings
• Nozzle-location drawings
• Cylinder-bank arrangements
• Equipment data sheets
• Bill of quantities
• Cause-and-effect matrix
• Control-panel logic
• Installation instructions
• Testing procedures
• Operation and maintenance manuals

Export Packing and Supply Coordination

As a lithium battery fire suppression system exporter from Delhi NCR, LIFEGUARD can support overseas supplies according to the agreed project and shipping scope.

Export support may include:

• Project-specific equipment identification
• Product data sheets
• Packing lists
• Commercial documentation
• Equipment labels and markings
• Protective export packing
• Pre-dispatch inspection
• Installation instructions
• Operation and maintenance documents
• Coordination with freight partners
• Technical clarification support

The exact documentation and packing requirements depend on the destination country, equipment type, shipping method and agreed commercial terms.

Customers should confirm local import, conformity, certification, installation and authority-approval requirements before finalising the order.

Export Markets Served

LIFEGUARD welcomes lithium battery fire suppression enquiries from:

Middle East

• United Arab Emirates
• Saudi Arabia
• Oman
• Qatar
• Kuwait
• Bahrain
• Jordan

Europe

• Germany
• France
• Italy
• Spain
• Netherlands
• Belgium
• Poland
• United Kingdom

Asia

• Bangladesh
• Nepal
• Sri Lanka
• Bhutan
• Maldives
• Singapore
• Malaysia
• Indonesia
• Thailand
• Vietnam

Africa

• Kenya
• Tanzania
• Uganda
• Ghana
• Nigeria
• South Africa
• Ethiopia

Customers from other countries may also share their project specifications and destination requirements for technical review.

Why Choose LIFEGUARD?

Established Delhi-Based Fire Safety Manufacturer

United Fire Equipments Pvt. Ltd. manufactures fire safety equipment and engineered fire protection systems under the LIFEGUARD brand.

Strategic Delhi NCR Location

Our Delhi NCR location supports coordination with consultants, contractors, logistics providers and international customers.

Application-Specific Engineering

We evaluate the battery chemistry, enclosure, capacity and operating environment before recommending a suppression solution.

Integrated Fire Protection Approach

Our systems can combine:

• Very early smoke detection
• Battery off-gas monitoring
• Heat detection
• Linear heat sensing
• Fire alarm controls
• Automatic suppression
• Battery shutdown
• Electrical isolation
• Ventilation control
• BMS integration
• Remote monitoring

Customised Export Solutions

System capacity, detection technology, cylinder arrangement, piping, control logic and documentation can be customised according to project requirements.

EPC and Tender Support

We can assist with:

• Budgetary quotations
• Technical proposals
• Compliance statements
• Equipment data sheets
• Bills of quantities
• System drawings
• Tender documentation
• Consultant submissions
• Project coordination

Technical and After-Sales Assistance

Subject to the agreed commercial scope, assistance may be provided for installation guidance, testing, commissioning, operation and maintenance planning.

Industries We Serve

LIFEGUARD lithium battery fire suppression systems are suitable for:

• Battery Energy Storage Systems
• Solar-energy projects
• Wind-energy facilities
• Electric vehicle charging stations
• Battery manufacturing plants
• Automotive facilities
• Data centres
• Telecom installations
• Battery warehouses
• Logistics centres
• Battery recycling facilities
• Electrical substations
• Oil and gas projects
• Petrochemical plants
• Marine and port applications
• Industrial manufacturing
• Commercial buildings
• Research laboratories
• Critical infrastructure

Benefits of LIFEGUARD Lithium Battery Fire Suppression Systems

A properly engineered system can help:

• Detect abnormal battery conditions early
• Reduce emergency-response time
• Generate automatic alarms
• Stop battery charging
• Isolate affected equipment
• Control visible flames
• Reduce heat exposure
• Limit fire propagation
• Protect valuable infrastructure
• Reduce equipment damage
• Support personnel evacuation
• Minimise operational interruption
• Improve emergency preparedness
• Provide remote alarm communication
• Support project risk-management objectives

The system should be integrated with safe battery design, preventive maintenance, correct electrical protection, suitable ventilation and a reliable Battery Management System.

Information Required for an Export Proposal

To prepare a suitable lithium battery fire suppression system export proposal, please share:

• Project name
• Destination country
• Delivery location
• Battery application
• Battery chemistry
• Battery manufacturer
• Total battery capacity
• Number of cells, modules and racks
• Battery state of charge
• Room or container dimensions
• Battery layout drawing
• Rack dimensions
• Ventilation details
• Maximum and minimum ambient temperatures
• Existing fire alarm system
• Existing suppression arrangement
• Available water supply
• Required standards
• Consultant specifications
• Tender documents
• Site photographs
• Required delivery schedule
• Preferred shipping terms

Our technical team will review the information and recommend an appropriate fire detection and suppression concept.

Frequently Asked Questions

Who is a lithium battery fire suppression system exporter in Delhi NCR?

United Fire Equipments Pvt. Ltd., under the LIFEGUARD brand, exports customised lithium battery fire detection and suppression systems for BESS projects, battery rooms, EV facilities, data centres, warehouses and industrial applications.

Does LIFEGUARD export lithium battery suppression systems?

Yes. LIFEGUARD supports international projects through technical evaluation, system documentation, export packing and equipment supply coordination.

Is LIFEGUARD based in Delhi NCR?

United Fire Equipments Pvt. Ltd. is based in Delhi and supports customers across Delhi NCR and international markets.

Which countries can LIFEGUARD supply?

LIFEGUARD can review enquiries from the Middle East, Europe, Asia, Africa and other international markets, subject to destination-country import and certification requirements.

Which suppression system is best for lithium batteries?

The appropriate system depends on battery chemistry, energy capacity, enclosure, ventilation, state of charge and project approval requirements. No single suppression medium is suitable for every lithium battery application.

Can the system protect a complete BESS container?

Yes. A complete detection and suppression system can be designed after reviewing the container dimensions, battery layout, ventilation and required shutdown sequence.

Can the system protect an individual battery cabinet?

Yes. Compact automatic suppression systems can be developed for battery cabinets, UPS cabinets, telecom cabinets and electrical enclosures.

Can the system connect with a Battery Management System?

Yes. Subject to compatible interfaces, the fire alarm or releasing panel can transmit signals for charging interruption, battery shutdown, rack isolation and emergency alarm communication.

Can the system detect a fault before visible flames appear?

A combination of aspirating smoke detection, off-gas detection and temperature monitoring may provide early warning. Performance depends on the selected sensors, installation position, airflow and battery configuration.

Is re-ignition possible after suppression?

Yes. Damaged lithium-ion cells may retain heat and can potentially re-ignite. The affected equipment should remain isolated and monitored after visible flames have been controlled.

Does LIFEGUARD provide technical drawings?

Depending on the agreed scope, LIFEGUARD can provide detection layouts, suppression-system drawings, piping details, nozzle arrangements, equipment data sheets, bills of quantities and cause-and-effect logic.

Can the system be customised for overseas projects?

Yes. System capacity, cylinder arrangement, detection technology, piping, controls and documentation can be configured according to the customer’s specifications and destination requirements.

Contact a Lithium Battery Fire Suppression System Exporter in Delhi NCR

Contact LIFEGUARD for:

• Lithium battery fire suppression systems
• BESS fire protection systems
• Battery-room suppression systems
• Battery-cabinet fire protection
• EV battery fire suppression
• Aspirating smoke detection
• Battery off-gas detection
• Linear heat-sensing systems
• Automatic releasing control panels
• Battery shutdown and BMS integration
• Export quotations
• Technical proposals
• System drawings
• Tender support
• Bills of quantities

Contact Details

United Fire Equipments Pvt. Ltd.

Manufacturer of ISI Certified Fire Safety Equipment

📞 8048034226

📧 ufe126@gmail.com | info@lifeguardindia.in

🌐 www.lifeguardindia.in