Lithium Battery Fire Suppression System Exporter UAE

Advanced Lithium-Ion Battery Fire Protection Solutions for UAE Projects

Lithium-ion batteries are increasingly used throughout the United Arab Emirates in Battery Energy Storage Systems, solar-energy projects, electric vehicles, data centres, telecommunications, industrial facilities, warehouses and critical infrastructure.

These batteries offer high energy density, compact construction, rapid charging and dependable performance. However, lithium-ion batteries can also create specialised fire hazards when exposed to overheating, overcharging, electrical faults, manufacturing defects, mechanical damage or cooling-system failure.

A damaged battery cell may enter thermal runaway, producing intense heat, smoke and flammable gases. The incident can spread from one cell to neighbouring modules and battery racks. Damaged batteries may also retain heat and create a risk of re-ignition after visible flames have been controlled.

United Fire Equipments Pvt. Ltd., under the LIFEGUARD brand, is a reliable lithium battery fire suppression system exporter to the UAE, supplying customised fire detection, alarm, shutdown, isolation and suppression solutions for lithium-ion battery applications.

We support project owners, consultants, EPC contractors, system integrators, renewable-energy developers, battery manufacturers and industrial organisations across:

• Dubai
• Abu Dhabi
• Sharjah
• Ajman
• Ras Al Khaimah
• Fujairah
• Umm Al Quwain
• Al Ain
• Jebel Ali and other industrial regions

United Fire Equipments Pvt. Ltd. is an India-based manufacturer and exporter supporting UAE projects through technical evaluation, engineering documentation, export supply and project coordination.

Trusted Lithium Battery Fire Suppression System Exporter for the UAE

Selecting an experienced lithium battery fire suppression system exporter UAE is important for protecting personnel, battery equipment, buildings and business operations.

A conventional portable fire extinguisher alone may not provide complete protection for a large lithium-ion battery installation. An engineered fire protection solution may require a coordinated combination of:

• Very early smoke detection
• Battery off-gas detection
• Heat and temperature monitoring
• Linear heat-sensing cable
• Automatic fire alarm controls
• Battery charging shutdown
• Electrical isolation
• Ventilation control
• Automatic suppression discharge
• Battery cooling
• Fire propagation control
• Remote alarm communication
• Manual emergency controls
• Post-discharge monitoring

LIFEGUARD develops application-specific systems according to the battery chemistry, energy capacity, rack configuration, enclosure volume, ventilation arrangement, environmental conditions and project requirements.

No single extinguishing medium should be considered universally suitable for every lithium-ion battery application. The final protection concept must be selected after evaluating the actual hazard.

What Is a Lithium Battery Fire Suppression System?

A lithium battery fire suppression system is an engineered fire protection arrangement designed to detect and respond to abnormal conditions within lithium-ion battery cells, modules, racks, cabinets, rooms or Battery Energy Storage System containers.

Depending on the application, the system may be designed to:

1. Detect smoke, heat, flame or battery off-gases.
2. Generate early-warning and confirmed fire alarms.
3. Activate audible and visual warning devices.
4. Transmit alarms to the main fire alarm system.
5. Stop battery charging and discharging.
6. Isolate the affected battery rack.
7. Shut down selected electrical equipment.
8. Control air-conditioning and ventilation.
9. Release the selected suppression medium.
10. Control visible flames and reduce heat exposure.
11. Limit propagation to neighbouring battery cells.
12. Continue monitoring for possible re-ignition.

The exact operating sequence is developed according to the battery application and approved cause-and-effect matrix.

Understanding Lithium-Ion Battery Fire Hazards

Lithium-ion batteries store a significant amount of electrical energy within a compact structure. When a cell operates outside its safe temperature, voltage or current range, internal chemical reactions can accelerate rapidly.

Common causes of lithium battery incidents include:

• Internal short circuits
• External short circuits
• Overcharging
• Excessive discharge
• Manufacturing defects
• Mechanical impact
• Cell puncture or crushing
• High ambient temperature
• Battery cooling-system failure
• Loose electrical connections
• Incorrect charger selection
• Battery Management System malfunction
• Water or moisture ingress
• Transportation damage
• Defective or ageing battery cells

During thermal runaway, an affected cell may release heat, smoke and flammable decomposition gases. Heat transfer to surrounding cells can result in thermal runaway propagation.

An effective lithium battery fire-safety strategy should therefore include:

• Quality battery cells and modules
• Reliable Battery Management System
• Correct electrical protection
• Suitable ventilation
• Temperature monitoring
• Early fire and off-gas detection
• Automatic shutdown and isolation
• Appropriate fire suppression
• Cooling and propagation control
• Emergency-response procedures
• Continued post-incident monitoring

A suppression system is one component of the overall safety strategy and does not replace safe battery design, preventive maintenance or electrical protection.

Lithium Battery Fire Suppression Applications in the UAE

1. Battery Energy Storage Systems

Battery Energy Storage Systems, commonly known as BESS, are used for renewable-energy integration, grid support, peak-load management, backup power and commercial energy management.

LIFEGUARD exports fire protection solutions for:

• Containerised BESS installations
• Indoor battery rooms
• Outdoor battery enclosures
• Utility-scale energy-storage projects
• Solar-plus-storage facilities
• Commercial energy-storage systems
• Industrial backup-power systems
• Microgrids
• Electrical substations
• Grid-support battery facilities

A BESS fire protection package may include:

• Aspirating smoke detection
• Battery off-gas detection
• Heat detection
• Linear heat-sensing cable
• Flame detection
• Automatic fire alarm panel
• Releasing control panel
• Suppression-agent cylinders
• Distribution piping and nozzles
• Battery Management System interface
• Ventilation shutdown
• Emergency exhaust integration
• Manual release and abort controls
• Audible and visual alarms
• Remote monitoring outputs

2. BESS Container Fire Suppression Systems

Containerised BESS units normally contain battery racks, electrical panels, power-conversion equipment, cooling systems and control devices within a compact enclosure.

A complete BESS container protection system may include:

• Very early smoke detection
• Battery off-gas monitoring
• Heat and temperature detection
• Linear heat-sensing cable
• Automatic releasing controls
• Suppression-agent storage cylinders
• Distribution piping
• Discharge nozzles
• Pressure-monitoring devices
• Battery shutdown contacts
• Ventilation interlocks
• Remote alarm transmission
• Manual activation controls
• Hooters and flashing strobes

The design should consider:

• Battery-rack arrangement
• Internal airflow
• Cooling-system operation
• Ventilation openings
• Cable penetrations
• Enclosure leakage
• Internal partitions
• Equipment obstructions
• Ambient temperature
• Maintenance access

3. Solar and Renewable-Energy Storage

The UAE has significant solar-energy infrastructure, and lithium battery systems can be used to store generated electricity for later use.

LIFEGUARD solutions may be supplied for:

• Utility-scale solar projects
• Solar-plus-storage plants
• Commercial solar installations
• Industrial renewable-energy systems
• Microgrids
• Remote power projects
• Residential energy-storage systems
• Grid-balancing installations

The fire protection system may be integrated with:

• Battery Management Systems
• Solar inverters
• Power-conversion systems
• Energy-management platforms
• Site fire alarm systems
• Remote monitoring systems

4. Electric Vehicle Charging Stations

Electric mobility is increasing across the UAE, creating a need for suitable fire protection at charging and parking facilities.

Protection may be required for:

• Indoor EV charging areas
• Basement parking facilities
• Commercial parking structures
• Shopping centres
• Hotels
• Residential towers
• Corporate offices
• Electric bus depots
• Fleet charging yards
• Electric truck charging stations
• Battery-swapping facilities
• EV maintenance workshops

A suitable fire protection strategy may include smoke detection, heat detection, flame detection, electrical isolation, automatic alarm, local suppression, water-based protection and ventilation control.

5. Electric Vehicle Battery Manufacturing and Testing

Lithium batteries present different hazards during production, assembly, charging, testing and temporary storage.

LIFEGUARD can develop fire protection solutions for:

• Battery cell manufacturing
• Battery module assembly
• Battery-pack production
• Battery charging areas
• End-of-line testing
• Battery test chambers
• Research laboratories
• Prototype testing facilities
• Battery repair areas
• Rejected-battery storage
• Damaged-battery quarantine zones
• Quality-control facilities

Protection can be developed for individual machines, test enclosures, production lines, battery racks or complete rooms.

6. Data Centres and UPS Battery Rooms

Lithium-ion batteries are increasingly used in data centres for uninterrupted power supply and backup-energy applications.

LIFEGUARD supplies solutions for:

• UPS battery rooms
• Server rooms
• Data halls
• Network operation centres
• Electrical rooms
• Telecom rooms
• Modular data centres
• Edge data centres
• Control and monitoring rooms

The system may be integrated with:

• Main fire alarm systems
• Building Management Systems
• UPS control systems
• Electrical shutdown systems
• Air-conditioning equipment
• Access-control systems
• Emergency ventilation
• Remote monitoring platforms

Very early warning detection may provide additional time for investigation before a serious fire develops.

7. Telecom Battery Installations

Telecommunications facilities depend on battery systems for reliable backup power and uninterrupted network operation.

Fire suppression systems may be exported for:

• Telecom battery rooms
• Mobile switching centres
• Remote telecom shelters
• Network equipment rooms
• Battery cabinets
• Communication towers
• Data transmission facilities
• Control rooms

Compact automatic suppression systems may be installed inside individual cabinets, telecom shelters or enclosed equipment zones.

8. Lithium Battery Warehouses

Lithium battery warehouses require a risk-based protection strategy because the fire hazard depends on battery chemistry, packaging, state of charge, storage height and rack arrangement.

LIFEGUARD systems may be supplied for:

• New lithium-ion battery cells
• Battery modules
• Finished battery packs
• Electric vehicle batteries
• Consumer-electronics batteries
• Power-tool batteries
• Industrial batteries
• Telecom batteries
• Returned battery products
• Defective batteries
• Damaged-battery quarantine areas

Important design considerations include:

• Total battery quantity
• Battery chemistry
• State of charge
• Storage height
• Rack configuration
• Aisle spacing
• Packaging material
• Fire compartmentation
• Water availability
• Smoke ventilation
• Emergency access
• Damaged-battery segregation

9. Battery Recycling Facilities

Used, damaged or defective batteries may have an unknown internal condition and can create fire hazards during collection, storage, dismantling and recycling.

Protection may be required for:

• Battery collection centres
• Battery recycling plants
• Waste battery storage
• Battery dismantling areas
• Material recovery facilities
• Electronic waste processing plants
• Returned-product warehouses
• Damaged-battery quarantine rooms

The fire protection arrangement should be coordinated with the facility’s storage methods, handling procedures, ventilation and emergency-response plan.

10. Marine, Offshore and Port Applications

Lithium battery systems are also used in electric vessels, offshore facilities, port equipment and marine backup-power systems.

LIFEGUARD solutions may be considered for:

• Marine battery rooms
• Electric and hybrid vessels
• Port handling equipment
• Offshore control systems
• Navigation equipment
• Communication systems
• Battery charging areas
• Emergency backup-power systems

System components should be selected according to humidity, vibration, corrosion exposure, enclosure design and project approval requirements.

Main Components of a Lithium Battery Fire Suppression System

Very Early Smoke Detection

Aspirating smoke-detection systems continuously sample air from the protected area through a network of pipes.

These systems may be suitable for:

• BESS containers
• Battery rooms
• Data centres
• UPS rooms
• Telecom facilities
• High-value industrial installations

The detector sensitivity and sampling arrangement should be selected according to airflow, enclosure configuration and the required alarm level.

Battery Off-Gas Detection

Lithium-ion cells may release gases during abnormal heating before visible flames appear.

Battery off-gas detection may support:

• Early warning
• Battery shutdown
• Rack isolation
• Ventilation control
• Remote alarm transmission
• Maintenance intervention

Sensor selection should consider battery chemistry, expected gas characteristics, ventilation and battery manufacturer information.

Heat and Temperature Detection

Heat-detection options may include:

• Fixed-temperature heat detectors
• Rate-of-rise heat detectors
• Linear heat-sensing cable
• Battery temperature sensors
• Thermal-camera integration

Linear heat-sensing cable may be installed near battery racks, modules, cable routes and other identified high-risk areas.

Flame Detection

Flame detection may be used where rapid recognition of open flames is required.

Possible detector technologies include:

• Ultraviolet detectors
• Infrared detectors
• Combined UV/IR detectors
• Multi-spectrum infrared detectors

Detector selection should consider the expected fire signature, viewing angle, obstructions and possible false-alarm sources.

Fire Alarm and Releasing Control Panel

The fire alarm or releasing panel receives signals from detection devices and initiates the programmed emergency sequence.

The panel may be configured to:

• Generate an early warning
• Display the affected zone
• Activate sounders and strobes
• Transmit alarms to a control room
• Stop battery charging
• Isolate the affected battery rack
• Shut down selected electrical equipment
• Stop air-conditioning
• Close fire dampers
• Control supply and exhaust fans
• Activate emergency ventilation
• Release the suppression medium
• Communicate with the Battery Management System
• Send signals to the Building Management System
• Provide remote alarm contacts

Cross-zone detection logic may be used where two independent alarm signals are required before automatic discharge.

Automatic Fire Suppression System

The suppression medium should be selected according to the battery hazard and project requirements.

Potential systems may include:

• Water-mist systems
• Water-based cooling systems
• Local-application suppression
• Specialised liquid suppression media
• Hydrated mineral or mica-based suppression media
• Clean-agent systems for associated electrical equipment
• Inert-gas systems for suitable enclosed hazards
• Condensed aerosol systems where technically appropriate
• Hybrid fire protection arrangements

The final selection should consider:

• Battery chemistry
• Cooling requirement
• Cell and module construction
• Protected volume
• Battery-rack arrangement
• Electrical conductivity
• Occupancy
• Ventilation
• Ambient temperature
• Discharge duration
• Fire propagation risk
• Re-ignition risk
• Available test data
• Consultant specifications
• Authority and insurer requirements

Clean-agent or oxygen-reduction systems may control flames in suitable enclosed applications, but battery cooling and continued monitoring requirements must also be evaluated.

Suppression Cylinders and Storage Tanks

Depending on the selected technology, the suppression medium may be stored in:

• Pressurised cylinders
• Modular suppression units
• Cabinet-mounted containers
• Skid-mounted cylinder banks
• Water-storage tanks
• Pump-operated systems

The required storage capacity is determined according to the protected hazard, application rate, agent quantity, distribution network and discharge duration.

Distribution Piping and Nozzles

The distribution network carries the extinguishing medium from the storage container to the protected area.

The design may consider:

• Pipe material
• Internal pipe diameter
• Total pipe length
• Bends and fittings
• Pressure losses
• Nozzle flow rate
• Nozzle coverage
• Battery-rack dimensions
• Internal obstructions
• Number of suppression zones
• Minimum operating pressure
• Required discharge duration
• Maintenance accessibility

Nozzles should be positioned so that racks, cable trays, electrical panels and structural components do not obstruct the discharge pattern.

Manual Release and Abort Controls

The system may include:

• Manual release switch
• Abort switch
• Emergency stop button
• Electrical isolation control
• System-disable switch
• Alarm acknowledgement control
• Local status indicators

Manual controls should be clearly labelled and installed at accessible locations according to the approved design.

Audible and Visual Warning Devices

Warning devices may include:

• Electronic hooters
• Sounders
• Sirens
• Flashing strobes
• Hooter-cum-flasher units
• Pre-discharge warning signs
• System-discharge indicators

These devices alert personnel before and during suppression-system operation.

How a Lithium Battery Fire Suppression System Works

A typical automatic fire suppression sequence may include the following stages.

Stage 1: Abnormal Condition Detected

A smoke, heat, gas, flame or temperature sensor identifies an abnormal condition inside the battery area.

Stage 2: Early Warning Generated

The control panel generates an alarm and transmits the condition to responsible personnel or a remote monitoring platform.

Stage 3: Fire Condition Confirmed

A second detector, cross-zone signal or programmed verification logic confirms the emergency.

Stage 4: Emergency Interlocks Activated

The system may:

• Stop battery charging
• Isolate the affected rack
• Shut down selected electrical equipment
• Stop air-conditioning
• Close fire dampers
• Control ventilation
• Activate emergency exhaust
• Transmit signals to the Battery Management System

Stage 5: Pre-Discharge Warning

Audible and visual devices warn personnel before automatic suppression discharge, where required.

Stage 6: Suppression Medium Released

The selected extinguishing medium is discharged through the engineered piping and nozzle network.

Stage 7: Fire Control and Cooling

The system works to control visible flames, reduce heat and limit fire propagation to surrounding cells and equipment.

Stage 8: Continued Monitoring

The affected battery installation remains isolated and monitored because damaged cells may retain heat and potentially re-ignite.

The final sequence is established through the approved cause-and-effect matrix.

Export Engineering Support for UAE Projects

LIFEGUARD follows a project-specific engineering approach for lithium battery fire suppression export requirements.

Technical Evaluation

Our engineering team may review:

• Battery chemistry
• Battery manufacturer
• Cell and module construction
• Total battery capacity
• Number of battery racks
• State of charge
• Charging and discharging process
• Room or container dimensions
• Battery layout
• Ventilation arrangement
• Maximum ambient temperature
• Environmental exposure
• Existing fire alarm system
• Existing suppression arrangement
• Available water supply
• Electrical shutdown requirements
• Consultant specifications
• Tender documents
• UAE project approval requirements

System Selection

The detection, alarm and suppression technologies are selected according to the actual battery hazard and operating environment.

Engineering Calculations

Depending on the selected system, engineering may include:

• Protected-volume calculation
• Suppression-agent quantity calculation
• Hydraulic flow calculation
• Pipe sizing
• Pressure-loss calculation
• Nozzle selection
• Nozzle coverage assessment
• Cylinder or tank sizing
• Discharge-time calculation
• Alarm and interlock logic

Technical Documentation

Project documentation may include:

• General arrangement drawings
• Fire detection layouts
• Suppression-system layouts
• Piping drawings
• Nozzle-location drawings
• Cylinder-bank arrangements
• Equipment data sheets
• Bill of quantities
• Cause-and-effect matrix
• Control-panel logic
• Installation instructions
• Testing procedures
• Operation and maintenance manuals

Export Packing and Supply Coordination

As a lithium battery fire suppression system exporter to the UAE, LIFEGUARD can support equipment supply according to the agreed project and shipping scope.

Export support may include:

• Project-specific equipment identification
• Technical data sheets
• Packing lists
• Commercial documentation
• Equipment labels and markings
• Protective export packing
• Pre-dispatch inspection
• Installation instructions
• Operation and maintenance documents
• Coordination with freight partners
• Technical clarification support

The exact documentation and packing requirements depend on the equipment type, shipping method, commercial terms and destination requirements.

Customers and local contractors should confirm customs, certification, installation and Civil Defence approval requirements before finalising the order.

UAE Approval and Compliance Considerations

Lithium battery fire protection systems supplied for UAE projects should be selected according to the approved project specification and applicable local requirements.

Approval criteria may depend on:

• Project location and emirate
• Facility classification
• Battery installation type
• Total energy capacity
• Fire detection technology
• Suppression-system type
• Consultant requirements
• Main contractor specifications
• Civil Defence requirements
• Insurer recommendations
• Equipment certification
• Installation and commissioning procedures

LIFEGUARD can prepare technical proposals and compliance documentation based on the project requirements supplied by the customer.

Final acceptance remains subject to the client, consultant, local installer, Civil Defence authority and other approving organisations.

Why Choose LIFEGUARD as Your UAE Export Partner?

Established Fire Safety Manufacturer

United Fire Equipments Pvt. Ltd. manufactures fire safety equipment and engineered suppression systems under the LIFEGUARD brand.

Application-Specific Engineering

We review the battery chemistry, capacity, enclosure and operating conditions before recommending a fire suppression solution.

Integrated Fire Protection Approach

Our systems can combine:

• Very early smoke detection
• Battery off-gas monitoring
• Heat detection
• Linear heat sensing
• Fire alarm controls
• Automatic suppression
• Battery shutdown
• Electrical isolation
• Ventilation control
• BMS integration
• Remote monitoring

Customised Export Solutions

The system capacity, detection technology, cylinder arrangement, piping, control logic and project documentation can be customised according to the customer’s requirements.

EPC and Tender Support

LIFEGUARD can assist with:

• Budgetary quotations
• Technical proposals
• Compliance statements
• Equipment data sheets
• Bills of quantities
• System drawings
• Consultant submissions
• Tender documentation
• Project coordination

Export Supply to the UAE

We support equipment supply for Dubai, Abu Dhabi, Sharjah and other UAE locations through export documentation, protective packing and logistics coordination.

Technical and After-Sales Assistance

Subject to the agreed commercial scope, assistance may be provided for installation guidance, functional testing, commissioning, system operation and maintenance planning.

Industries We Serve in the UAE

LIFEGUARD lithium battery fire suppression systems are suitable for:

• Battery Energy Storage Systems
• Solar-energy projects
• Renewable-energy facilities
• EV charging stations
• Electric bus depots
• Automotive facilities
• Data centres
• Telecom installations
• Battery warehouses
• Logistics centres
• Battery recycling facilities
• Electrical substations
• Oil and gas projects
• Petrochemical facilities
• Marine and port applications
• Industrial manufacturing
• Hotels and shopping centres
• Commercial buildings
• Research laboratories
• Critical infrastructure

Benefits of LIFEGUARD Lithium Battery Fire Suppression Systems

A properly engineered system can help:

• Detect abnormal battery conditions early
• Reduce emergency-response time
• Generate automatic alarms
• Stop battery charging
• Isolate affected equipment
• Control visible flames
• Reduce heat exposure
• Limit fire propagation
• Protect critical infrastructure
• Reduce equipment damage
• Support personnel evacuation
• Minimise operational interruption
• Improve emergency preparedness
• Provide remote alarm communication
• Support project risk-management objectives

The fire suppression system should be integrated with safe battery design, preventive maintenance, suitable ventilation, correct electrical protection and a reliable Battery Management System.

Information Required for a UAE Export Proposal

To prepare a suitable lithium battery fire suppression system proposal, please share:

• Project name
• UAE project location
• Delivery destination
• Battery application
• Battery chemistry
• Battery manufacturer
• Total battery capacity
• Number of cells, modules and racks
• Battery state of charge
• Room or container dimensions
• Battery layout drawing
• Rack dimensions
• Ventilation details
• Maximum ambient temperature
• Existing fire alarm system
• Existing suppression arrangement
• Available water supply
• Required standards
• Consultant specifications
• Tender documents
• Site photographs
• Required delivery schedule
• Preferred shipping terms

Our technical team will review the available information and recommend an appropriate detection and suppression concept.

Frequently Asked Questions

Who exports lithium battery fire suppression systems to the UAE?

United Fire Equipments Pvt. Ltd., under the LIFEGUARD brand, exports customised lithium battery fire detection and suppression systems for BESS projects, EV charging facilities, battery rooms, data centres, warehouses and industrial applications in the UAE.

Is LIFEGUARD a UAE-based manufacturer?

United Fire Equipments Pvt. Ltd. is an India-based fire safety equipment manufacturer and exporter. We support UAE projects through export supply, engineering documentation and project coordination.

Does LIFEGUARD export systems to Dubai and Abu Dhabi?

Yes. LIFEGUARD supports project enquiries for Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah, Al Ain and other UAE locations.

Which fire suppression system is best for lithium batteries?

The appropriate system depends on battery chemistry, capacity, enclosure, ventilation, state of charge and approval requirements. No single suppression medium is suitable for every lithium battery application.

Can the system protect a complete BESS container?

Yes. A complete detection and suppression solution can be designed after reviewing the BESS container dimensions, battery arrangement, ventilation system and required shutdown sequence.

Can the system protect an individual battery cabinet?

Yes. Compact automatic suppression systems can be developed for battery cabinets, UPS cabinets, telecom cabinets and electrical enclosures.

Can the system connect with a Battery Management System?

Yes. Subject to compatible interfaces, the fire alarm or releasing panel can provide signals for charging interruption, battery shutdown, rack isolation and emergency alarm communication.

Can the system detect a fault before visible flames appear?

A combination of aspirating smoke detection, off-gas detection and temperature monitoring may provide early warning. Performance depends on the selected sensors, installation location, airflow and battery configuration.

Is re-ignition possible after a lithium battery fire?

Yes. Damaged battery cells may retain heat and can potentially re-ignite. The affected equipment should remain isolated and monitored after visible flames have been controlled.

Does LIFEGUARD provide technical drawings?

Depending on the agreed scope, LIFEGUARD can provide detection layouts, suppression-system drawings, piping details, nozzle arrangements, equipment data sheets, bills of quantities and cause-and-effect logic.

Can the system be customised for UAE environmental conditions?

Yes. Components and system arrangements can be selected according to specified ambient temperature, humidity, dust exposure, coastal conditions and project requirements.

Does LIFEGUARD provide export packing?

Protective export packing, product identification and shipping documentation can be provided according to the agreed commercial scope.

Contact a Lithium Battery Fire Suppression System Exporter for the UAE

Contact LIFEGUARD for:

• Lithium battery fire suppression systems
• BESS container fire protection
• Battery-room suppression systems
• Battery-cabinet fire protection
• EV battery fire suppression
• EV charging-station fire protection
• Aspirating smoke detection
• Battery off-gas detection
• Linear heat-sensing systems
• Automatic releasing control panels
• Battery shutdown and BMS integration
• UAE export quotations
• Technical proposals
• System drawings
• Tender support
• Bills of quantities

Contact Details

United Fire Equipments Pvt. Ltd.

Manufacturer of ISI Certified Fire Safety Equipment

📞 8048034226

📧 ufe126@gmail.co